Hallo zusammen,
das Miniplayfield meines Dr. Who treibt mich in den Wahrnsinn. Zu Anfang lief es, fand aber nicht die richtige Position. Nun geht es garnicht mehr.
Folgendes steht im Manual:
In meinem Fall sind die Fehlermeldungen
MiniPF Error - No CW Movement
MiniPF Error - No CCW Movement
- Keine defekte Sicherung
- Kabel am Motor getauscht
Woran könnte es noch liegen?
Gruß
Michael
das Miniplayfield meines Dr. Who treibt mich in den Wahrnsinn. Zu Anfang lief es, fand aber nicht die richtige Position. Nun geht es garnicht mehr.
Folgendes steht im Manual:
MiniPF Error - CW Direction Reversed
MiniPF Error - CCW Direction Reversed
MiniPF Error - No CW Movement
MiniPF Error - No CCW Movement
The Mini-PF has a Problem positioning itself.
The abbreviations CW is clockwise direction, CCW is counter-clockwise as viewed rom the front of the game. If both reversed errors occur, the DC-Motor is wired backwards. If only 1 reversed message occurs, the motor direction driver is stuck on/off (loose wire?).
No movement in both directions can be a fuse or loose wire from the motor. No movement in one direction can indicate a loose wire, inding playfield or a defective motor controller board.
In meinem Fall sind die Fehlermeldungen
MiniPF Error - No CW Movement
MiniPF Error - No CCW Movement
- Keine defekte Sicherung
- Kabel am Motor getauscht
Woran könnte es noch liegen?
Gruß
Michael